Smart Hidden Keyless Cabinet Lock, Hidden Card Lock For Wooden Cabinet, Cupboard, Drawer, Furniture
In-Store Pickup | Yes |
---|---|
Delivery Time | 2 - 4 days |
- Easy to install. No need to drill holes, and no damage to your cabinet.
- Easy to operate. Has the function of auto-rebounce and auto-lock.
- Stainless steel latch and ABS plastic lock body, durable and anti-corrosion.
- This is suitable for wooden doors only, widely used especially for drawers, lockers, cabinets, and sliding doors.
- Stand-alone, reset system can be recognized all cards.
- When the voltage is low, swiping the guest card will beep 8 times and the lock will open, and the lock tongue will not come out after another 8 beeps. The lock is in the normally open state, reminding the customer to change the battery.
Operation Instruction
Function |
Operation |
Initialization function |
The initialization button has a small hole on the back of the lock cylinder near the edge of the battery cover. Press and hold the battery initialization button for 3 seconds (1 beep). When the lock is unlocked and the motor rotates, the initialization is successful. |
Single and double open |
After initializing, you hear a beep and immediately release it as a single open, and then initialize and hear two beeps as a double open. Double opening requires the management card and guest card to be swiped to unlock. |
Management card |
The first and second cards allocated after initialization are management cards, which can be equipped with daily cards and can be unlocked in an emergency. |
Normal card |
Customers only need to read the management card and hear a beep. The daily card can be matched within 5 seconds, and 13 normal cards can be matched continuously. Swipe the management card 5 times to delete all normal cards. |
Low voltage alarm |
When the voltage is lower than 4.8V, the door lock will give an alarm 5 times after the card is swiped, and it will be locked normally, reminding to replace the battery. |
Ultra-low voltage |
When the voltage is lower than 4.7V, the door lock will sound 5 alarms after swiping the card, the bolt will not be automatically locked, and the battery needs to be replaced. |
Very low voltage automatic unlocking |
The low voltage is 4.6V, the door lock is checked every three minutes, and the bolt springs out automatically. (It is not turned on by default, you need to swipe the management card to turn it on.) |
Cancel/restore low battery automatic unlocking mode |
The factory state is the default mode is low battery automatic non-unlocking mode, (the low battery unlocks when the battery is installed and the sound of music is installed, and the low battery mode is canceled when the battery is installed dididi (3 beeps)). If you swipe the management card 9 times continuously, a long beep will be canceled. If you resume swiping 9 times, you will also have a long beep. The music sound will be restored after installing the battery. |
Automatic pop-up function |
When locked, swipe card to unlock automatically pop up. |
External power supply |
To prevent the battery from running out, you can use an external power supply to unlock the lock in an emergency |
Tchnical Specifications:
Power supply |
4pcs AAA alkaline batteries |
Low voltage alarm |
4.8V |
Voltage |
4.5V~6.5V |
Stand-by current |
35uA |
Working current |
Less than 200mA |
Unlock time |
5 seconds (automatically close the lock) |
Working temperature |
+10~70 Celsius |
Supported card types |
MIFARE M1 card |
IC card number |
14pcs |
Unlock way |
By card |
Motor interface output voltage |
Battery voltage drop 0.3V |